Optimizing product design and development of engine carbon cleaning maintenance tools using reverse engineering and VDI 2222 methods

Dewa Kusuma Wijaya, B.J Ridwan Hartono, Jazuli Jazuli, Dwi Nurul Izzhati

Abstract


This research article explains the product design and development optimization of multi feature engine carbon cleaning maintenance tools. The implementation of the Reverse Engineering method was integrated with VDI 2222 in the research process. The results of the optimal design and development of this tool obtained a component structure that was able to meet 14 types of consumer needs with a total tool cost of IDR 1.137.900 with a total tool weight of 6.9 kg. The results of the load test simulation concluded that the housing case was able to withstand the overall weight of the components that make up the tool. Depending on the liquid chemical used, the results of tool tests on a limited scale have proven to be able in save fuel consumption by ±12.5% per hour with engine workload which can also be reduced by 3,14%.

Keywords


Reverse Engineering; VDI 2222; Optimization; Product Design Development; Engine Carbon Cleaning Maintenance Tools

Full Text:

PDF

References


L. Jiang, A. K. Agrawal, and R. P. Taylor, “Clean combustion of different liquid fuels using a novel injector,” Exp Therm Fluid Sci, vol. 57, pp. 275–284, 2014, doi: 10.1016/j.expthermflusci.2014.05.002.

D. Damodharan, A. P. Sathiyagnanam, D. Rana, S. Saravanan, B. Rajesh Kumar, and B. Sethuramasamyraja, “Effective utilization of waste plastic oil in a direct injection diesel engine using high carbon alcohols as oxygenated additives for cleaner emissions,” Energy Convers Manag, vol. 166, pp. 81–97, Jun. 2018, doi: 10.1016/j.enconman.2018.04.006.

K. M. N. Islam, J. Hildenbrand, and M. M. Hossain, “Life cycle impacts of three-way ceramic honeycomb catalytic converter in terms of disability adjusted life year,” J Clean Prod, vol. 182, pp. 600–615, May 2018, doi: 10.1016/j.jclepro.2018.02.059.

S. M. Abbas and A. Elayaperumal, “Experimental investigation on the effect of ceramic coating on engine performance and emission characteristics for cleaner production,” J Clean Prod, vol. 214, pp. 506–513, Mar. 2019, doi: 10.1016/j.jclepro.2018.12.040.

V. D. Chaudhari and D. Deshmukh, “Diesel and diesel-gasoline fuelled premixed low temperature combustion (LTC) engine mode for clean combustion,” Fuel, vol. 266, Apr. 2020, doi: 10.1016/j.fuel.2019.116982.

A. Vembathu Rajesh, C. Mathalai Sundaram, V. Sivaganesan, B. Nagarajan, and S. Harikishore, “Emission reduction techniques in CI engine with catalytic converter,” in Materials Today: Proceedings, Elsevier Ltd, 2020, pp. 98–103. doi: 10.1016/j.matpr.2019.05.369.

B. Wu, Z. Zi, X. Zou, J. Li, and S. Jin, “Effect of diesel and gasoline blending fuel coordinate with in-cylinder charge conditions on efficient and clean combustion based heavy-duty diesel engine,” Fuel, vol. 297, Aug. 2021, doi: 10.1016/j.fuel.2021.120790.

N. Udhayakumar, S. Ramesh Babu, R. Bharathwaaj, and R. Sathyamurthy, “An experimental study on emission characteristics in compression ignition engine with silver and zinc coated catalytic converter,” in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 4959–4964. doi: 10.1016/j.matpr.2021.04.314.

K. Hou, B. Deng, Y. Chen, J. Ran, and J. Fu, “For cleaner exhaust of a high performance motorcycle: A macroscopic comparative study of catalytic converters under world-wide motorcycle test cycle,” J Clean Prod, vol. 284, Feb. 2021, doi: 10.1016/j.jclepro.2020.124730.

J. Ondriga, P. Zvolenský, and S. Hrcek, “Application of technical diagnostics in the maintenance of the internal combustion engine of diesel multiple units 812 series.,” in Transportation Research Procedia, Elsevier B.V., 2021, pp. 637–644. doi: 10.1016/j.trpro.2021.07.030.

Y. Huang et al., “Effective emissions reduction of high-mileage fleets through a catalytic converter and oxygen sensor replacement program,” Science of the Total Environment, vol. 850, Dec. 2022, doi: 10.1016/j.scitotenv.2022.158004.

N. Bahaloo-Horeh and S. M. Mousavi, “Efficient extraction of critical elements from end-of-life automotive catalytic converters via alkaline pretreatment followed by leaching with a complexing agent,” J Clean Prod, vol. 344, Apr. 2022, doi: 10.1016/j.jclepro.2022.131064.

H. C. Zhao, S. B. Wang, T. Z. Yu, and P. Sun, “Study on combustion and emissions characteristics of acetone-butanol-Ethanol(ABE)/gasoline premixed fuel in CISI engines,” Case Studies in Thermal Engineering, vol. 51, Nov. 2023, doi: 10.1016/j.csite.2023.103591.

S. Vellaiyan, “Energy extraction from waste plastics and its optimization study for effective combustion and cleaner exhaust engaging with water and cetane improver: A response surface methodology approach,” Environ Res, vol. 231, Aug. 2023, doi: 10.1016/j.envres.2023.116113.

Y. Qian, Y. Zhang, S. Mi, H. Wu, Z. Li, and X. Lu, “Efficient and clean combustion of intelligent charge compression ignition (ICCI) engine at low load conditions,” Fuel, vol. 332, Jan. 2023, doi: 10.1016/j.fuel.2022.126002.

B. Zhang, X. Li, Q. Wan, B. Liu, G. Jia, and Z. Yin, “Hydrocarbon emission control of an adsorptive catalytic gasoline particulate filter during cold-start period of the gasoline engine,” Energy, vol. 262, Jan. 2023, doi: 10.1016/j.energy.2022.125445.

Z. Zhang et al., “Multi-objective optimization of the three-way catalytic converter on the combustion and emission characteristics for a gasoline engine,” Energy, vol. 277, Aug. 2023, doi: 10.1016/j.energy.2023.127634.

M. S. Almanzalawy, M. F. Elkady, S. Mori, and A. E. Elwardany, “The role of acetone for cleaner combustion in diesel engine,” Process Safety and Environmental Protection, vol. 170, pp. 886–897, Feb. 2023, doi: 10.1016/j.psep.2022.12.071.

J. Li, Y. Liang, S. Wang, S. Wu, W. Yang, and R. Liu, “Blending n-octanol with biodiesel for more efficient and cleaner combustion in diesel engines: A modeling study,” J Clean Prod, vol. 403, Jun. 2023, doi: 10.1016/j.jclepro.2023.136877.

X. Yang et al., “Improvement of flow field uniformity and temperature field in gasoline engine catalytic converter,” Appl Therm Eng, vol. 230, Jul. 2023, doi: 10.1016/j.applthermaleng.2023.120792.

K. S. Lin, N. V. Mdlovu, R. S. Juang, and M. T. Tang, “Fine structural characterization of noble metals in washcoat of motorcycle three-way converter catalysts,” J Environ Chem Eng, vol. 11, no. 2, Apr. 2023, doi: 10.1016/j.jece.2023.109530.

G. Pise and M. Nandgaonkar, “Enhancement of catalytic converter performance to reduce cold start emissions with thermal energy storage – An experimental study,” Mater Today Proc, vol. 72, pp. 1125–1131, Jan. 2023, doi: 10.1016/j.matpr.2022.09.181.

S. S. Ingle, K. G. Joshi, S. S. Raj, and E. Elangovan, “Emission analysis of catalytic converter with coating of nanomaterials,” in Materials Today: Proceedings, Elsevier Ltd, 2023, pp. 250–255. doi: 10.1016/j.matpr.2023.06.175.

P. Sun et al., “Artificial neural network models for forecasting the combustion and emission characteristics of ethanol/gasoline DFSI engines with combined injection strategy,” Case Studies in Thermal Engineering, vol. 54, Feb. 2024, doi: 10.1016/j.csite.2024.104007.

Y. Wang, G. Wang, L. Yang, G. Chen, and S. He, “Intelligent optimization of diesel engine Selective catalytic reduction urea injection based on multi-model state estimation to reduce NH3 slip and NOx emission,” Fuel, vol. 365, p. 131188, Jun. 2024, doi: 10.1016/j.fuel.2024.131188.

J. Zhang et al., “Effects of hydrogen peroxide on the combustion and emissions of an ethanol/gasoline combined injection engine under different excess air ratios,” Fuel, vol. 359, Mar. 2024, doi: 10.1016/j.fuel.2023.130521.

G. Fan, Z. Zheng, and L. Li, “Effect of hydrogen injection coupled with high-energy ignition on the combustion stability of a lean-burn gasoline engine,” Int J Hydrogen Energy, vol. 49, pp. 602–620, Jan. 2024, doi: 10.1016/j.ijhydene.2023.08.294.

W. Shi et al., “A renewable clean energy application: Oxyhydrogen negative pressure inhalation for enhancing the combustion and emission characteristics of isopropanol/gasoline dual-fuel combined injection engine,” Energy, vol. 290, Mar. 2024, doi: 10.1016/j.energy.2023.130214.

S. Bolegenova et al., “Staged supply of fuel and air to the combustion chamber to reduce emissions of harmful substances,” Energy, vol. 293, Apr. 2024, doi: 10.1016/j.energy.2024.130622.

J. Liu et al., “Optimizing combustion and emissions in natural gas/diesel dual-fuel engine with pilot injection strategy,” Thermal Science and Engineering Progress, vol. 48, Feb. 2024, doi: 10.1016/j.tsep.2024.102418.

A. H. Weeks, S. Mazor, and A. A. Thomas, “Catalytic converter theft: An emerging risk factor for carbon monoxide poisoning,” JEM Reports, vol. 3, no. 1, p. 100076, Mar. 2024, doi: 10.1016/j.jemrpt.2024.100076.

X. Liu, Y. Wei, H. Wu, and T. Zhang, “Factor analysis of deformation in resistance spot welding of complex steel sheets based on reverse engineering technology and direct finite element analysis,” J Manuf Process, vol. 57, pp. 72–90, Sep. 2020, doi: 10.1016/j.jmapro.2020.06.028.

Y. Qie, S. Bickel, S. Wartzack, B. Schleich, and N. Anwer, “A function-oriented surface reconstruction framework for reverse engineering,” CIRP Annals, vol. 70, no. 1, pp. 135–138, Jan. 2021, doi: 10.1016/j.cirp.2021.04.016.

K. Saiga, A. S. Ullah, A. Kubo, and Tashi, “A Sustainable Reverse Engineering Process,” in Procedia CIRP, Elsevier B.V., 2021, pp. 517–522. doi: 10.1016/j.procir.2021.01.144.

R. H. Helle and H. G. Lemu, “A case study on use of 3D scanning for reverse engineering and quality control,” in Materials Today: Proceedings, Elsevier Ltd, 2021, pp. 5255–5262. doi: 10.1016/j.matpr.2021.01.828.

I. Gonzalez-Perez and A. Fuentes-Aznar, “Reverse engineering of spiral bevel gear drives reconstructed from point clouds,” Mech Mach Theory, vol. 170, Apr. 2022, doi: 10.1016/j.mechmachtheory.2021.104694.

S. Kim, “Generating a virtual physical model through measurement data and reverse engineering: Applying a performance prediction model for an industrial gas turbine during start-up,” Appl Therm Eng, vol. 232, Sep. 2023, doi: 10.1016/j.applthermaleng.2023.120927.

A. C. Kyaw, N. Nagengast, C. Usma-Mansfield, and F. K. Fuss, “A Combined Reverse Engineering and Multi-Criteria Decision-Making Approach for Remanufacturing a Classic Car Part,” in Procedia CIRP, Elsevier B.V., 2023, pp. 222–228. doi: 10.1016/j.procir.2023.02.133.

N. Emminghaus et al., “PBF-LB/M process under a silane-doped argon atmosphere: Preliminary studies and development of an innovative machine concept,” Advances in Industrial and Manufacturing Engineering, vol. 2, May 2021, doi: 10.1016/j.aime.2021.100040.

R. Löffler, S. Tremmel, and R. Hornfeck, “Development and Implementation of a Guideline for the Combination of Additively Manufactured Joint Assemblies with Wire Actuators made of Shape Memory Alloys,” in Procedia CIRP, Elsevier B.V., 2023, pp. 1–6. doi: 10.1016/j.procir.2023.02.125.

C. P. M. Sianipar, “Environmentally-appropriate technology under lack of resources and knowledge: Solar-powered cocoa dryer in rural Nias, Indonesia,” Clean Eng Technol, vol. 8, Jun. 2022, doi: 10.1016/j.clet.2022.100494.




DOI: https://doi.org/10.31315/opsi.v17i1.12032

Refbacks

  • There are currently no refbacks.


Bookmark and Share


Sekretariat :
Jurusan Teknik Industri
FTI UPN "Veteran" Yogyakarta
d.a Jalan Babarsari 2 Tambakbayan Yogyakarta 55281
Telp. (0274) 486256
Website http://jurnal.upnyk.ac.id/index.php/opsi
email : [email protected]

 

indexed by:

 
 
 


Lisensi Creative Commons
This work is Licensed Under a Creative Commons Attribution 4.0 International license.

View My Stats