Metal Failure Analysis and Maintenance Planning on Gasoline Storage Tank Pipe PT Pertamina Refinery Unit VI

Asfitrah Alamsyah

Abstract


Inspection and corrosion controlling is essential to avoid work accidents and losses to the company. In this study, the authors conducted a case study with PT Pertamina Refinery Unit VI Balongan, which processes crude oil into fuel, non-fuel, and petrochemical products. Material failure analysis was carried out by inspecting the pipes of the gasoline storage tank, which indicated corrosion. Tests were carried out by analyzing pipe thickness, water impurities, XRD, and SEM-EDX. The test results showed pipe thinning from 24 to 20 inches. Corrosion in gas storage tank pipes is caused by iron oxide, the main product of corrosion, and chlorine as a catalyst that accelerates corrosion. In addition, the SEM test shows a flowery structure, indicating surface defects. Apart from that, XRD testing on the deposits that cover the pipes shows the presence of goethite, hematite, and magnetite, which are oxidation products of iron or carbon steel. Controlling chlorine levels and using inhibitors can be one way to manage corrosion in pipes.


Keywords


Pipe, Corrosion, Gasoil, Inhibitor, Physical Metallurgy

Full Text:

PDF

References


Ahmad, J., Purbolaksono, J., & Beng, L. C. (2010). Thermal fatigue and corrosion fatigue in heat recovery area wall side tubes. Engineering Failure Analysis, 17(1), 334–343. https://doi.org/10.1016/j.engfailanal.2009.06.014

Baoyou, Z., Zhonghong, L., Yuexian, C., & Xigang, F. (2006). Analysis of a boiler pipe rupture. Engineering Failure Analysis, 13(1), 75–79. https://doi.org/10.1016/j.engfailanal.2004.10.015

Chattoraj, I., Das, S. K., & Bhattacharya, D. K. (1997). CORROSIVE DEGRADATION AND FAILURE OF VERTICAL FURNACE WALL TUBES OF A BOILER. In Engineeriny Failure Analysis (Vol. 4, Issue 4).

Hariyandi, L., Sholihah, Q., Kusairi Samlawi, A., Akhmad Yani Km, J., & Selatan, K. (2017). ANALISA MENINGKATNYA PEMAKAIAN OLI PADA ENGINE C7 EXCAVATOR 320D CATERPILLAR MENGGUNAKAN 8 STEP TROUBLESHOOTING (STUDI KASUS PT. KASONGAN BUMI KENCANA) (Vol. 2, Issue 2).

Masuyama, F. (2007). Creep rupture life and design factors for high-strength ferritic steels. International Journal of Pressure Vessels and Piping, 84(1–2), 53–61. https://doi.org/10.1016/j.ijpvp.2006.09.006

Mobley, R. K. (1999). Root cause failure analysis. Newnes.

Nyoman Adnyana, D. (2017). METALURGI STRESS CORROSION CRACKING OF CAGE SUPERHEATER TUBES OF A NEWLY BUILT BOILER. In diterima untuk diterbitkan tanggal (Vol. 3). www.ejurnalmaterialmetalurgi.com

Obot, I. B. (2021). Under-Deposit Corrosion on Steel Pipeline Surfaces: Mechanism, Mitigation and Current Challenges. Journal of Bio- and Tribo-Corrosion, 7(2). https://doi.org/10.1007/s40735-021-00485-9

Othman, H., Research, T., Bhn, S., & Purbolaksono, M. J. (n.d.). Failure Analysis on Deformed Superheater Tubes by Finite Element Method.

Purbolaksono, J., Ahmad, J., Khinani, A., Ali, A. A., & Rashid, A. Z. (2010). Failure case studies of SA213-T22 steel tubes of boiler through computer simulations. Journal of Loss Prevention in the Process Industries, 23(1), 98–105. https://doi.org/10.1016/j.jlp.2009.06.005

Ranjbar, K. (2007). Failure analysis of boiler cold and hot reheater tubes. Engineering Failure Analysis, 14(4), 620–625. https://doi.org/10.1016/j.engfailanal.2006.03.007

Society of Mechnical Engineers, A. (n.d.). ASME B31.4: Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids.

Sustainability_Report_Refinery_Unit_VI. (n.d.).

Utomo, B. (2009). JENIS KOROSI DAN PENANGGULANGANNYA (Vol. 6, Issue 2).

Zhou, H., Chen, S., Du, Y., Lin, Z., Liang, X., Liu, J., & Xing, F. (2020). Field test of a reinforced concrete bridge under marine environmental corrosion. Engineering Failure Analysis, 115. https://doi.org/10.1016/j.engfailanal.2020.104669




DOI: https://doi.org/10.31315/jmept.v4i1.9134

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Journal of Metallurgical Engineering and Processing Technology

Journal of Metallurgical Engineering and Processing Technology indexed by:

 


 



Journal of Metallurgical Engineering and Processing Technology (JMEPT)


Department of Metallurgical Engineering, UPN "Veteran" Yogyakarta
Metallurgical Research and Development Centre (MRDC)-UPNVY
Gd. Urip Sumohardjo Lt. 2
Jl. Babarsari No. 2, Tambakbayan, Yogyakarta 55281

View My Stats
slot gacor slot